|
| The Universal Preamplifier 8 (UP8) is specially designed
for operation with the new RWA 2000 series and can achieve
a maximum data rate only with the 2002, 2003, and 2004
models. At the same time, it can be used with our previous
generation of test equipment such as the RWA2585.
The Universal Preamplifier 8 integrates with Guzik
MR-head amplifier and any Commercial head amplifier,
both of which must conform to the new Guzik head loader
(HLM-2F and HLM-3F) form factor. An upgrade kit is available
for S1701A*, S1701A+, and S1701B spinstand models.
*S1701A
Spinstand will require additional modification at Guzik
Technical Enterprises.
|
| Features |
- 2Gbit Data Rate
- 1.8 GHz Analog Bandwidth
- Works with Guzik MR5 and any Commercial Amplifier
|
| Specifications |
Read Channel
- Bandwidth: 1KHz to 1.8GHz
at -3dB
- Flatness: 300KHz to 1GHz
±0.2dB
- Group Delay Flatness: ±100psec
to 1GHz
- Typical Non-Linear Distortion: better than 1%
(1GHz, output level 300mV
p-p single-ended)
- Amplification Accuracy: 2%
- Low cut-off frequency can be changed to 2MHz
for pop-corn noise measurements
Write Channel
- 2Gbit/sec data speed
- Write Current: Serial control
- MR Head Bias Current: -10mA
to +10mA in 0.01mA
steps (for Guzik MR5) or serial control
- Separate write data outputs for Guzik MR5 and commercial
head amplifiers (PECL level)
|
){kind=link}