New V2018 Spinstand addresses the limitations of V2002 Spinstand in high-TPI Head Gimbal Assembly (HGA) testing. The low bandwidth of V2002 glass scale based closed loop positioning system restricts the uniformity of servo writing, making it almost impossible to write servo with high-TPI HGAs.
Guzik V2002 spinstand is created for testing Head Gimbal Assemblies (HGA), Head Stack Assemblies (HSA), Head Arm Assemblies (HAA), as well as for the media testing.
The Guzik DTR Test System belongs to a new generation of Guzik test systems designed for R&D and Production of the Discrete Track Recording components.
Guzik DTR 3000 spinstand is created for testing Head Gimbal Assemblies (HGA), Head Stack Assemblies (HSA), Head Arm Assemblies (HAA), as well as for the DTR and non-DTR media testing.
The Guzik S-1701MP Micro Positioning Spinstand is equipped with a patented² closed loop positioning system consisting of a piezo substage and precision optical scales with 0.04 µIn resolution.
Guzik S-1701A Micro Positioning Spinstand is dynamically improved2 over its predecessors 1701MP and 1701CF.
Guzik S-1701A+ Micro Positioning Spinstand achieves a better electrical and mechanical noise isolation compared to its predecessor S-1701A due to its separated control box and spinstand.
Guzik S-1701B Micro Positioning Spinstand achieves better electrical and mechanical noise isolation compared to its predecessors S-1701A and S-1701A+ due to its separated control box and spinstand and air shock absorbers, installed inside the spinstand frame.
Better Test Results Repeatability on Different Spinstands Up to Three Times Better Spinstand Positioning Accuracy Up to Two Times Better Accuracy of W/R Offset Measurements
Micro Positioning system delivers 1 µInch positioning repeatability. Linear Simulation of Rotary Skew configurable from -7 to +22 degrees. Available factory upgrade from standard S-312 to S-312MP. Builds on recognized Guzik S-312 reliability, durability, installed base and industry experience.